The Forward Stabilizer Of Cross-section Stability

[mac205 0]

Good afternoon.

I from Russia, Moscow.

Till now I only read the given forum, being trained.

Now I build Peugeot 205 with motor TU5JP4, have bought a forward stretcher from version GTI, and here the stabilizer on it is not present.

 

Actually a question: it is impossible to find the stabilizer from 205 GTI in Russia.

Whether who established the stabilizer from Citroen Xara or Citroen ZX.

 

In advance thanks.

 

Sory for bad English.

[jimistdt 1]

Hello Mac, welcome to the forum

 

Just to clear a couple of things up, I think you are referring to the Anti Roll Bar, (ARB as we call it).

 

I know that people often use the 309 front ARB, but I think that will be just as unobtainable for you also.

 

There is a member by the name of WERF, lives near you, he has had 205's maybe he can help?

 

Good luck, I hope you find what you are looking for.

[mac205 0]

ARB from 309 to find unfortunately too it has not turned out.

Thanks for council, but with Werf I am familiar. On this question it could not help me.

Main point - whether probably to establish ARB from Citroen ZX or Peugeot 306

[mac205 0]

Again hello.

Whether who can prompt - how much forward cross-section levers from 309 more long than from 205? It is assured that who measured that, but find at a forum could not.

 

In advance thanks.

[jimistdt 1]

Apparantly, a member called Foreigner fitted a ZX front ARB to his 205, maybe you could PM and see if he came across any issues?

 

I'm not sure how much longer the 309 front ARB is compared to the 205 one, but I'm sure someone will enlighten you.

Edited February 5, 2010 by jimistdt

[nick 3]

Welcome to the forum Mac. Is it just me, or does anyone else read Macs posts in a very bad Russian accent like Alan Partridges girlfriend...??

 

Nick

[Baz 421]

The 205 and 309 ARB's are the same length. (GTi)

[mac205 0]

Извените что по русски. Но вдруг понятней будет. Интересует - насколько передние поперечные рычаги от 309 длиннее чем от 205. То что стабилизаторы отличаются только толщиной - я знаю.

 

Excuse that on Russian. But it will be suddenly more clear.Interests - how much forward cross-section levers from 309 more long than from 205. That that stabilizers differ only in the thickness - I know.

[GeorgeXS 32]

Welcome to the forum Mac. Is it just me, or does anyone else read Macs posts in a very bad Russian accent like Alan Partridges girlfriend...??

 

Nick

 

Hahaha reminded me of that as well!

[jimistdt 1]

Извените что по русски. Но вдруг понятней будет. Интересует - насколько передние поперечные рычаги от 309 длиннее чем от 205. То что стабилизаторы отличаются только толщиной - я знаю.

 

Excuse that on Russian. But it will be suddenly more clear.Interests - how much forward cross-section levers from 309 more long than from 205. That that stabilizers differ only in the thickness - I know.

 

Hello Mac, I read both the Russian question and the English one but I'm not entirely sure what the question is., I think something must be getting lost in translation.

 

As Baz say's the 203 & 309 are the same - except as you say regarding thickness.

 

Certainly the droplinks on the 205 & 309 are the same part number.

 

Fair play to you mate, hope you get your answers.