1.9gti Fusebox

[Weser 30]

Hi,

 

Im going to replace my fusebox as it has loose connections in at the moment.

 

My question is before I start unplugging the connectors, are all the connectors different sizes so I cant get them mixed up? Or should I do them one by one so as not to mix them up?

 

Also can I use any gti fusebox or does it have to be a 1.9 fuse box. (My car is a Ph 2)

 

Thanks

 

Andy

[dan_cole69 0]

Hi,

 

To answer part of your question yes some of the plugs are the same/similar so it would be an idea to number them and have a diagram to cross referance.

 

As for the fuse board I think you will be fine using any injection model fuse board because (and I think im right in saying please correct if wrong) the only difference between injection fuse boards and carb fuse boards is the connection for the fuel pump (small yellow connector 2 pin IIRC).

 

Hope this helps

 

Dan

[Weser 30]

Cheers Dan,

 

Just what I wanted to know.

 

Thanks

[pug_ham 244 3 Cars]

None of the fusebox plugs can be mixed up afaik, they are all specifically keyed for one place on the fuseboard.

 

As shown in this picture.

 

Graham.

[Weser 30]

None of the fusebox plugs can be mixed up afaik, they are all specifically keyed for one place on the fuseboard.

 

As shown in this picture.

 

Graham.

 

 

A picture even better

 

Cheers

[Daviewonder 533 3 Cars]

None of the fusebox plugs can be mixed up afaik, they are all specifically keyed for one place on the fuseboard.

 

 

Im sure they even have coloured dots on the board next to the plugs aswell so you just match the coloured spots on the board to the plugs making it even easier.