Gti6/vts Rear Engine Stabiliser Mount

[CosKev 16]

Help needed to clear this up please ready for my conversion

 

Do you use the 205/309 rear alloy engine mount and yoke,or the Gti6 mount and yoke?????

 

I presumed they were the same but Servicebox lists different part numbers

[Flix 0]

I used the 205 one.

[2052006 10]

I'm pretty sure the alloy "yoke" is exactly the same from 306/xsara and 205. My VTS and 205 ones were anyway. As for the standard fit rubber bush, I'm not sure, but from my experience I would uprate that part anyway.

[shooter mcgavin 37]

I used the 205 ones with a uprated bush,just extended the yoke by about 17mm or so.

[CosKev 16]

Cheers every1

 

Thats what I wanted to hear,got uprated mount in my 309 one now,so just swap that over to VTS eng

[marksorrento205 80]

Kev,

 

Im sure they are the same. I used the one from my mi engine with the bbm mount in it, which was from the 8v and its fitted on all three engines a treat

[CosKev 16]

Thanks Mark,

It was just the different part numbers on service box got me thinking

The mount,bush and yoke are all diff numbers between 309 Gti and Gti6