Pts Group A Negative Camber Hubs

[pug_ham 243 3 Cars]

I've recently got hold of a set of PTS 1.6 group A negative camber hubs (7218A/:huh: & even after reading through the Rally build manual I can't find any definitive figure for how much negative camber they can be set to.

 

 

I spoke to Miles earlier & he thinks its about 1' maximum but I just wondered if anyone else knew for certain?

 

Graham.

[Baz 421]

I was pretty sure it was around 1' too if that helps!

[Henry Yorke 269 3 Cars]

Are they adjustable camber then?

[pug_ham 243 3 Cars]

Cheers, Baz, I also thought 1' but wondered if there was more.

Are they adjustable camber then?

It would appear so but not by much, the bushes are elliptical (sp? ) so there is a little bit of adjustment but there isn't a lot of material in them to allow for it.

 

Adjusting the camber by turning the bushes will also adjust the castor minutely imo as well so careful setting up is needed with someone that knows what they are doing.

 

Thankfully I know of one such place not far from here.

 

Graham.

[pug_ham 243 3 Cars]

While looking for other info I found this topic which suggests these hubs actually give 1.5' negative camber.

 

Getting better all the time.

 

Graham.