Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
td_dan

How To Remove.....

Recommended Posts

td_dan

...what i think is the speedo cable i know the pic isnt brilliant as it was dark and i had to use the lights off my van but any help would be appreciated as its the only thing iv got to remove now. It goes into the top of the gearbox and then into the bulkhead

 

SP_A0026.jpg

Edited by td_dan

Share this post


Link to post
Share on other sites
pug309twin40s

from the look of the pic that is the cable for the reverse gear. do you have to lift up then reverse next to first gear?

 

 

the speedo cable is at the back of the gearbox near the driveshaft, held in place with a black rubber pin that goes through the speedo drive housing.

Share this post


Link to post
Share on other sites
td_dan

oh right im not sure if i do as the car is at my house and im currently out. How do i remove it?

Share this post


Link to post
Share on other sites
DamirGTI

Just unscrew (like a nut , with 19mm wrench) the lower bit which goes into the gearbox and pull the cable out :) .. and it's a lift up reverse cable yes , not the speedo one ..

 

Damir B)

Share this post


Link to post
Share on other sites
td_dan

ok thank you

Share this post


Link to post
Share on other sites
Sign in to follow this  

×