Be1 Clutch Cable, Arm Problem

[Death_Machine 0]

hi there im in the process of putting a be1 gearbox in to my 205 i put in the correct cable and lift up reverse ect but as i only ever had be3 gear boxs its slightly different the way the arm releases the center thrust bearing. It just isnt thats the problem an to help i took a pic to try and help its as if the triangle peice and arm that goes into bearing needs something between them it take up the slack whre i have put a bolt, if so can i see any pics as to know what im looking for and how the correct way is thanks guys!!

 

 

[EdCherry 34 1 Cars]

Theres normally a short bar in there. If I had my spares here id measure one for you buy I got a rough idea its about 40mm long.

[Death_Machine 0]

Theres normally a short bar in there. If I had my spares here id measure one for you buy I got a rough idea its about 40mm long.

 

does it stayin somehow any chance of someone sending me one?

[EdCherry 34 1 Cars]

A spring goes to each arm normally but theres enough pressure to keep it in there by itself for a while.

 

Unfortunatly need my spare incase one drops out!

[Baz 421]

You can buy them new from Pug. Well, they're listed on servicebox anyway.

[Death_Machine 0]

You can buy them new from Pug. Well, they're listed on servicebox anyway.

 

hi does anyone have a pug part number to the part i need as they generally not to helpful near me with out chassis number . thanks

[pugpete1108 62 1 Cars]

just cut one from a peice of bar? 40mm long. thats what i did

 

pressure will keep it in there, unless your clutch cable snaps then it will fall out

[Baz 421]

hi does anyone have a pug part number to the part i need as they generally not to helpful near me with out chassis number . thanks

 

2120.46 FORK LINK 1.14 GBP

Edited January 11, 2010 by Baz

[dcc 855]

i have 2 of these sat in my drawer, if you need one gimme a shout

[Cazzo 0 1 Cars]

does it stayin somehow any chance of someone sending me one?

 

 

 

I'm feed up losing these so I have a safe guard now

 

 

 

 

.

[jord294 94]

I'm feed up losing these so I have a safe guard now

 

 

 

your missing a piece off the end of your clutch cable

 

perhaps that's why you kept losing the pegs

[Cazzo 0 1 Cars]

.

 

Cheers Bud,

 

It is still being put together after a rebuild so all the bits are not in place yet,

 

The pic is just to show that the bar is attached to part of the loom so that if the clutch cable snaps the wee bar will not fall on to the road

and then I can get the spare cable out of the boot for some Road Side Repairs

 

 

.

Edited January 14, 2010 by Cazzo