Cv Nut

[toddydal 1]

can you only buy cv nuts from peugeot, its for a 1.6 205 gti

[toddydal 1]

i have been round 3 motor factors and none stock it

[Pob 1]

i have been round 3 motor factors and none stock it

 

The driveshaft nuts? Yes you can buy them from Peugeot

 

Dan

[Tom Fenton 1,542]

Main dealer, or find a Fasteners place that has a 20x1.5 nyloc in stock (not that common) or dare I say it, I've reused old ones in the past

[davey sprocket 14]

Main dealer

 

3297 14

SELF LOCKG NUT

4.08 GBP

[EdCherry 34 1 Cars]

I've bought plenty for motorfactors. APD and Neat Auto's to name two.

[toddydal 1]

still can not find these nuts,i have put the old one back on for now until i can get one from peugeot but it looks like its been used loads of times and i would feel better with a new one,i changed the cv boot and i borrowed one of them CV Bootgun Air tools and what a doddle it is with one of them much easer than the normal plastic cone tool

[lagonda 42]

I re-use these nuts but use Loctite instead of staking them over. Never had a problem with any car I've done this with. Means you don't have to un-stake them to undo them, which is a bonus. Absolutely essential of course to remove all traces of grease etc from nut & stub axle thread. I use Swargfega on a small toothbrush to do that. Only issue I had was taking the car for MoT with the wheel centre cap off....the guy failed it on that amongst other things as it wasn't staked over....told him it was Loctited, but as he said, he couldn't see that.

[GLPoomobile 958]

AB Motorsport sell nyloc nuts. Probably cheaper to get them from a fasteners place as Tom said, but I think I only paid about £5 for my pair from AB.