Mi16 Which Flywheel

[danny56712 1]

hi im running an mi16 engine and changing my gearbox from 1900 to 1600 and wiondering if putting an 8v flywheel on makes any difference

[Anthony 1,003]

You'll need to retain the Mi16 flywheel as the 1.6/1.9 8v GTi ones don't have the 60-2 timing teeth for the crank sensor

[danny56712 1]

You'll need to retain the Mi16 flywheel as the 1.6/1.9 8v GTi ones don't have the 60-2 timing teeth for the crank sensor

 

 

Thank you very much this is all i needed to know. cheers

 

Only other thing is any other flywheel off any other pug/citroen a better choice or is lightening or aluminium my only options

[DrSarty 90 1 Cars]

Thank you very much this is all i needed to know. cheers

 

Only other thing is any other flywheel off any other pug/citroen a better choice or is lightening or aluminium my only options

 

Have you tried searching Danny?

[decoc182 0]

You could try one off an xu7jp4 1.8 16v? it should fit, however I could be wrong. they are the same size as the 1.6 and 1.9 engines i believe, and have the 60-2 teeth.

[B1ack_Mi16 67]

You could try one off an xu7jp4 1.8 16v? it should fit, however I could be wrong. they are the same size as the 1.6 and 1.9 engines i believe, and have the 60-2 teeth.

 

Also Motronic 205 Gti engines will have the correct flywheel, however why not just use the Mi16 flywheel and clutch in the first place.

[welshpug 1,661]

You could try one off an xu7jp4 1.8 16v? it should fit, however I could be wrong. they are the same size as the 1.6 and 1.9 engines i believe, and have the 60-2 teeth.

 

 

that flywheel IS a 1.9 gti item as well as it was used on the DKZ cat equipped engines.

[decoc182 0]

Oh rite good to know, so i should be able to use a 1.9 gti clutch on my xu7 engine?