Boot Badge Fitting

[pugdamo 111 2 Cars]

Iv recently bought a 309 GTI and iv just got a new set of boot badges,trouble is there are no badges on the boot,i hoped the new badges would come with a template(no such joy). Can anyone recommend a way to get them in the right place or could some nice person measure all there badges.

Height from the bottom

Distance in from the outer edge of the bootlid,

and finally the distance the gap between the 309 badge and the GTI badge

 

Massive thankyou in advance

[lemmingzappa 75 1 Cars]

My only advice would be to study lots of pictures

[jord294 92]

will sort it for you tomorrow pugdamo

[pugdamo 111 2 Cars]

Thanks for the quick replies,

Thanks Jord,your a legend

[CosKev 16]

IMO just use the Pug badge and the Gti

 

The 309 badge looks too big and not right

 

[jord294 92]

measurements are from bottom corner of badges

 

'peugeot' badge - 18mm up from bottom edge of boot lip and 40mm from left edge of boot lid

 

'gti' - 16mm up from bottom edge of boot lip and 25mm from right edge of boot lid

 

'309' - (measured from left hand of 'gti' badge once 'gti' badge has been fixed) so from centre left hand centre of 'gti' badge to centre of '309' badge is 12mm, and at 16mm up from bottom edge of boot lip

 

hope this helps

Edited January 8, 2010 by jord294

[pugdamo 111 2 Cars]

measurements are from bottom corner of badges

 

'peugeot' badge - 18mm up from bottom edge of boot lip and 40mm from left edge of boot lid

 

'gti' - 16mm up from bottom edge of boot lip and 25mm from right edge of boot lid

 

'309' - (measured from left hand of 'gti' badge once 'gti' badge has been fixed) so from centre left hand centre of 'gti' badge to centre of '309' badge is 12mm, and at 16mm up from bottom edge of boot lip

 

hope this helps

 

Thanks a lot,ill put them on tomorrow.