Copper Head Gasket

[TomGTI 0]

Hi, I need advice I give to other cam engine 1.9 Mi-16.What torque on a copper head gasket? Thanks for the reply.Tom

[petert 588]

The same as standard. It's about the head bolts, not the gasket. Make sure you've got correct liner protrusion, or else it will leak.

[TomGTI 0]

Thank you. I have to increase the compression ratio. Because reprofil cams required. Cams are 286 degrees. I heard that this can not take material from the head. Is that true? I know that still not reach the required proportion without pistons. But I will try to maximize the compression ratio. Seals of copper is 0.5 millimeters by Taylor Engineering, a very interesting information for me. Thank you for your reply, I'm glad you like that I can at least komunikovat.Moje English is very weak, much thanks to Tom.