Joehow 0 Posted January 2, 2010 The bubbling and corrosion on the rear wheel arches and down to the sills of my 205 has got to the point where i really need to tackle it somehow. I do not want to go down the filler route or anything like this as this wont actually solve any problems... The rust so far is only surface however i would like to prevent it before anything gets worse. Am i right in assuming i can be replacement weld in panels and obviously two sills to accompany them? The main reason for the rust is due to a poor respray by the previous owner who sprayed over the gap between the sill and rear arch. Thanks Joe Share this post Link to post Share on other sites