Rear Arch And Sill Rust

[Joehow 0]

The bubbling and corrosion on the rear wheel arches and down to the sills of my 205 has got to the point where i really need to tackle it somehow.

 

I do not want to go down the filler route or anything like this as this wont actually solve any problems... The rust so far is only surface however i would like to prevent it before anything gets worse.

 

Am i right in assuming i can be replacement weld in panels and obviously two sills to accompany them?

 

The main reason for the rust is due to a poor respray by the previous owner who sprayed over the gap between the sill and rear arch.

 

Thanks

 

Joe