Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
welshpug

What Decent Pads For Lucas-girling S16 Type Calipers

Recommended Posts

welshpug

I have tried looking for 1144's in MDB1869 shape and can't find any, which is odd seeing as the 306 S16, 90% of 405's, and the ZX 16v used them.

 

So what is there as an alternative that don't cost too much? the price of the 1144's for a 1.9 205 caliper seems reasonable, seem to cost significantly more for the gti6 caliper.

 

They are quite small pads, a 54mm piston 94.7 x 48.8 x 19.4mm thick, compared to the 1.9 205's 48mm piston and 99.9 x 64.8 x 18.7mm pads :)

 

the gti6 has a 57mm piston a 129.8 x 56.5 x 19.3mm pad

 

 

I would like to stick to this brake setup as they're a fair bit lighter than a gti6 caliper and disc set, though I do have a set of discs and o.e citroen pads and a pair of calipers but missing a yoke/carrier.

Share this post


Link to post
Share on other sites
Craigb

Have you tried contacing questmead

 

Alan i think is the chap.

 

01706 860088

Share this post


Link to post
Share on other sites
welshpug

thanks, by the looks of it Mintex just dont do anything uprated for that pattern, what is odd is that there's a pad listed for the 405 under a different number, but the pattern is the same one as far as I can tell, hadnt thought of looking what the number was for that car/caliper :)

 

I've figured what I believe is the Ferodo part number for my pattern, FCP406, £114 for DS2500 :lol:

 

 

 

I'm off for another search using the 405 pad pattern number!

Edited by welshpug

Share this post


Link to post
Share on other sites
welshpug

might have got the size of the pads wrong comparing the 405 and 306, confused now! will have a look at a brake pad book for the actual sizes later :)

 

 

 

306 pad - 4251 07 zx pad - 95 666 894

Edited by welshpug

Share this post


Link to post
Share on other sites
Miles

Mintex do 1144 & 1155's for the S16/405 Calliper, Can;t recall the number thou now but it's not always under what you think, The 406 Brembo's are listed under the Focus RS for example

Share this post


Link to post
Share on other sites
welshpug

so they do fit?

 

strange!

 

MDB 1652 Width: 109,9 mm, Height: 57,3 mm, Thickness: 19,3

 

or

 

MDB 1376 Width 94,7 mm Height 48,8 mm Thickness 19,4

 

 

second one looks more likely :)

Edited by welshpug

Share this post


Link to post
Share on other sites
Miles

1376/1869

 

Never seen a 1652 thou :wacko: not even in the Mintex book

Share this post


Link to post
Share on other sites
welshpug

how weird, it's on the Mintex online catalogue for the Phase 2 405!

 

could you price some 1376/1869 1144's up please Miles?

Edited by welshpug

Share this post


Link to post
Share on other sites
Miles

I'll try on Monday, I think my supplier might be on the Xmas Hol's thou

Share this post


Link to post
Share on other sites
welshpug

Thanks, I'll see if I can scrape a few pounds together :wacko:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×