Xu10j4rs Engine Coolant Additives

[SurGie 54]

Hi people,

 

I though about using this stuff for both my 6 and 205 conversion, Click me to see

 

Has anyone here tried it out in the summer as well as the winter, and what are your opinions and experience

with this type of stuff ?

 

I assume its good stuff to use on the track and for use in the summer for the 205.

My 6 does get quite hot when standing in traffic, so i thought about using some to help keep my 6 a little bit cooler.

 

All the fans etc work fine, i just dont like it too close to the red light.

 

Thanks in advance

 

George..

[SurGie 54]

Mods, please delete, double post due to internet problem.

 

Thanks

[Galifrey 1]

Mods, please delete, double post due to internet problem.

 

Thanks

 

They are a surface tension modifier that can stop the coolant suffering mini "boiling" around the block/head. I used to use water wetter when I was racing, and did see some improvement in cooling, but it depends on your application. You wont automatically see an improvement in temps unless your coolant is suffering from this phenomenon.

[DamirGTI 344]

All the fans etc work fine, i just dont like it too close to the red light.

 

Change thermostat and fan termoswitch with a few deg. colder ones

 

Damir

[Galifrey 1]

Change thermostat and fan termoswitch with a few deg. colder ones

 

Damir

 

That wont help if the fan is already running full blast mate, twin fans however....

[CosKev 16]

That wont help if the fan is already running full blast mate,

 

Should do,fan kicking in earlier has got to help