Dash Screw Part No Needed :)

[marksorrento205 80]

Hello all.

 

Im after a part no for the screw that clamps the r/h side of the clocks surround by the wiper stalks. I have used my one on a different car and now I need to put mine together its gone. Below are a couple of pics to show you what I mean

 

 

 

If anyone has one great but a part no will do too.

 

Cheers

[chrisj21 2]

There doesn't seem to be a part number on service box for it when looking at the dash part.

 

I'm sure i have one in an old clock surround, i'll check for you when i get back.

 

(i'll pm you regarding the mount aswell )

 

Chris

[marksorrento205 80]

Cheers Chris,

 

I have looked through servicebox myself and I cant find it, but knowing my luck it will be with the fuel tank parts or something daft, I was just hoping someone knew of a part no.

[welshpug 1,657]

tis a T20 headed self tapping screw IIRC.

[DaveW 6]

I never reused that screw, normaly snap off or get stuck.

[Tesstuff 222]

Can't you use mine

 

By the way, your signature needs an update...Bye bye blackie

[hengti 2]

you can do it, when you B&Q it

 

?

[GLPoomobile 958]

You want a part number for the screw? Dude, it's a screw. It ain't gold plated, magnetic, or lemon scented, it's just a screw!

[marksorrento205 80]

Fair do's

 

As wp said its a t20 headed one that was the only reason I wanted a replacement one It turns out that a standard phillips headed screw fits and does the job too. So happy days you can all worry not

 

Glp - I like the idea of a lemon scented one

[GLPoomobile 958]

I've only ever found phillips headed ones on my 205s (when they are there, that is), so I thought that was the norm. Hence my surprise at you wanting a part number for a screw

[lagonda 42]

Mine's philips headed but it's not self-tapping, it screws into a small captive nut...probaby 8mm at a guess.

[GLPoomobile 958]

I'm sure it's supposed to screw into one of those little U shaped clips with the holes in, rather than a captive nut. Or is that what you were meaning? The clip slots over part of the plastic inside and sits in place, then the screw taps in to the holes in the clip.

[lagonda 42]

No, definitely a threaded screw & captive nut on mine (89 CTi). Perhaps this was how Peugeot made up to CTi owners p*ssed off at not getting GTi front suspension.....