306 Hdi Gearbox And 1.9gti Driveshafts

[ryan_stdt 2]

hi, as above really, i am using a 306 hdi gearbox on my diesel conversion and i was told that the 1.9 gti drive shafts that im using may not be a straight fit.

 

please could someone give me any advice on if they will work togther or not

cheers

Edited November 19, 2009 by ryan_stdt

[Richie-Van-GTi 72 2 Cars]

They should be fine in relation to the gearbox. Just unsure of the straight section on the O/S shaft in relation to the intermediate bearing carrier.

[welshpug 1,661]

only issue I think you may have is the left hand inner CV cup not sealing properly as the design was changed, you'd need to retain the inner joint from the 306.

 

the r/h inner section of the shaft is the same as any other XU/XUD.

[ryan_stdt 2]

sorry for the late reply but cheers guys

 

i doing to have a go at modifing the drive shafts today