Dizzy / Ignition Amp Wiring...

[kilauea 7]

After considerable struggling (and replacement of leads, plugs, dizzy, coil and amp), I think I have located my not-sparking problem to be the plug that the dizzy signal cable goes into (and on into the 7 pin connector to amp). Basically the wires had popped out of the plug and were loose in the rubber boot (doh!).

 

Does anyone know which way they go back in?.. I've got red, green and black wires and the holes on the black plug are marked 1, 2 and 3.

 

I bloody hope this is it and it fires up.

 

cheers,

Gaz

[kilauea 7]

S'o.k - found it by trial and error. Got spark now but still not starting.....About to give up on it soon.