Jump to content

  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

    • Sign In
    • or

Sign in to follow this  
Followers 0
aCe

Bx Mi16 Wiring Details

By aCe, in Aftermarket Engine Management Systems

Recommended Posts

aCe    0

aCe
Posted

Heys guys, i have done a search but nothing comes up. I have a BX loom (green and yellow) and need in depth detailson how to wiring it up.

 

I have removed the sensors 8v loom and thats bout it

 

please help

Share this post

Link to post
Share on other sites

Ryan    99

Ryan
Posted

The BX loom is very simple to wire up.

 

- Yellow spade connector about 6" from the ECU = fuel pump positive.

- Thick blue wire at the far end of the loom = 12V from the battery

- White 2-pin plug near the middle = one pin is switched 12V from the ignition barrel, the other is a feed for the rev counter.

 

IIRC those should be enough to get the engine running.

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing Aftermarket Engine Management Systems
×