[car_upgrade] My 205 S16 With A Nice Little Garrett Thingy....

[sander swinkels 8]

http://www.youtube.com/user/EricYellow0031#p/a

[stut16 0]

just want say your car looks the part and it goes just as well can i just ask where did you get you exhaust manifold from trying to get hold of one i want to build a gti6 turbo engine for my 205 t16 rep

 

cheers stu

[Joe-Tait 0]

Wkd car goes well too

[un numero d'or 38 3 Cars]

http://www.dp-engineering.nl/EN/products/e...e_stainless.php

 

 

just want say your car looks the part and it goes just as well can i just ask where did you get you exhaust manifold from trying to get hold of one i want to build a gti6 turbo engine for my 205 t16 rep

 

cheers stu

[EricYellow 1]

And we're back on the road again

Got the ME gearbox working and the car is going to get a fresh MOT next week.

Since I usually sell the cars I have when they're finished there are 2 options....

Sell it (it's as good as finished...), or just find something else to do so it isn't finished

Selling isn't going to happen just yet since I found some drivetrain bits on the floor of the workshop a few days ago.

I'm now going to look into getting a 4x4 system of a T16 into the car.

If I'm going down that road, the car will be off the roads for quite a while.

Anybody got any tips/tricks/links to other guys who've tried getting a 4x4 system on a 205 ?

 

 

ps. I'n NOT going to go the Dimma way and make it a widebody.

I want to build it so you don't see anything unusual from the outside.

[stefan 4]

http://forum.205gtidrivers.com/index.php?showtopic=97967

 

Yes, that would be great, like a WRC sleeper, I only wouldn't use the peugeot drivetrain, MITSUBISHI (for example), a lot better, durable, more performance parts available...

Edited August 7, 2010 by stefan

[EricYellow 1]

I think I will be using the Peugeot drivetrain, matching Mitsubishi or any other drivetrain to the ME5T gearbox won't be an easy job I think...

[stefan 4]

I ment use the mitsubishi gearbox and diffs as well.

 

A guy overhere started to do it, on a 405, overhere:

http://forum.205gtidrivers.com/index.php?s...=121939&hl=

 

Anyway, I'm sure it would be great, mitsubishi or peugeot.

Good luck!

[Guest JayTee]

this is awsome, what managment you using on this? also what thickness is your decomp plate mate?

[hexhamstu 9]

Thirdtimelucky aka paul on here has done a 4x4 conversion while keeping standard looks, he hasn't got a project thread or anything as far as I know. http://forum.205gtidrivers.com/index.php?s...=104159&hl=

[EricYellow 1]

@Hexhamstu: I've sent him a pm for more info.

 

Thanks !

 

 

@JayTee: I'm using Vems management, the decomp plate is eehhhrrmmm......don't know anymore, it's in for about 2,5 years so I forgot

I do know that the compression ratio now is 8,5:1, so you can do a little math and try to figure out how thick it is

Edited August 22, 2010 by EricYellow

[peter 20]

Sorry to bring up an old thread, but what rpm does your car start to make boost, and when does it make full boost?

Im just about to fit a similar turbo to my car.

 

 

thanks!!