Solid Rear Mounts Height (+)

[Sergio205 0]

Does anyone know what the height of the rear mounts of the rear beam is? I wonder about the mount of rectangular shape? I need their size for a custom fabrication of the mounts.

Thanks.

[petert 578]

Does anyone know what the height of the rear mounts of the rear beam is? I wonder about the mount of rectangular shape? I need their size for a custom fabrication of the mounts.

Thanks.

 

Just drill a 10mm hole through the centre of some 50mm aluminium bar. Height is approx. 35mm. Someone will know exactly the correct height.

[Sergio205 0]

Just drill a 10mm hole through the centre of some 50mm aluminium bar. Height is approx. 35mm. Someone will know exactly the correct height.

 

I didn't quite get you - if the height is approx. 35 mm why to use 50 mm bar?

[petert 578]

I didn't quite get you - if the height is approx. 35 mm why to use 50 mm bar?

 

50mm diameter round bar. Cut it off a bit longer than 35mm. On a lathe, face one end, turn around and face other end to 35mm long. Centre drill, then 10mm drill straight through. Too easy!

Edited October 1, 2009 by petert

[Sergio205 0]

50mm diameter round bar. Cut it off a bit longer than 35mm. On a lathe, face one end, turn around and face other end to 35mm long. Centre drill, then 10mm drill straight through. Too easy!

 

Got yuo ! Thanks!