Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Dave G

Injectors

Recommended Posts

Dave G

does any one no if i can put my standard cossie yellow injectors in my 1.9. they are both yellow and my are nosey to the put i can hear them with the window down and its defo not the top end etc

Share this post


Link to post
Share on other sites
Daviewonder

AFAIK cossie yellows are 311 cc / min. im not sure about 205 1.9 ones but im sure someone will be along soon that does :wacko:

Share this post


Link to post
Share on other sites
dcc

you need to check the resistances of them too. some are low resistance, I know that 205's use about 15ohm injectors. I started a topic a few weeks back about injectors might be worth a search as there was good info there.

Share this post


Link to post
Share on other sites
Baz

1.9 ones are 180cc iirc.

Share this post


Link to post
Share on other sites
taylorspug

Id imagine you would need ballast resistors to use the Cossie ones. Plus unless you are running forced induction they will be far too big. Take the serial number off the side of the injector and type it into google along with bosch injector, you will get a massive table up with all the serial numbers and injector cc's, and some of the lists even tell you what cars they were used on.

Share this post


Link to post
Share on other sites
Galifrey

Cosworth Injectors

 

Yellows&Dark Blues 311cc/min@3bar

 

803 Greens 382cc/min@3bar

 

400 Lt Blues437cc/min@3bar

 

Greys503cc/min@3bar

Share this post


Link to post
Share on other sites
Sign in to follow this  

×