Rear Wheel Bearing / Disks

[Dj_mini 7]

Iv found that iv got a wheel bearing gone on the rear (1.9 disk beam) i phoned up my local supplyer who said id need a whole hub as you cant replace just the bearing, surely i can press the bearing out the same as a front? I realy dont want to buy a hub as there a bit pricey!

 

Can anyone advise?

[Miles 331 1 Cars]

Most supply the complete hub, I think my local factors supply the bearing in Ringwood (New forest Motor Factors)

[cRaig 273 1 Cars]

Mm, Ive just been sold two new hubs for the back of my 1.9 today. Couldnt get the bearings seperately, and I was in too much of hurry to argue and find someone else lol.

Wasnt cheap :s

[Tom Fenton 1,540]

The inner race is usually machined into the hub casting, meaning you cannot buy a bearing to swap over, you have to buy the lot.

[Dj_mini 7]

I got around to changing this at the weekend and it was indeed the case that i needed a whole hub as the bearing is machined out of the hub.

But i managed to get one from gsf at a fair price so not all bad.

[Miles 331 1 Cars]

Must say this but GSF bearing's can be poor, Today I had 2 turn up, one had a rusty washer in it from God knows where and a pattern bearing which sounded dry as soon as I fitted it, But the other box was QH and was a OE SKF bearing.