Setting Up The Suspension

[jerseypug 1]

i have a 205 xs with 309 gti bottom arms and drive shafts, gti subframe, gti6 engine and be3 box, adjustable top mounts set to max caster. i measured the camber and the drivers side has 0.9 neg camber and the pass side was 1.9 neg

i then fitted my compbrake bottom arms to see if i could use the adjustment to get the camber the same but they hit the anti roll bar in 2 places either side.

has anyone any idea why the camber would be different in the first place?

will a 306 gti anti roll bar fit and clear the compbrake bottom arms?

thanks

any help would be appreciated.

[welshpug 1,645]

different camber = its bent or just normal Peugeot tolerances.

 

doubt the 306 ARB will fit, its quite a lot wider.

[johnnyboy666 195 1 Cars]

i have a similar situation, although its with tca's from a 309, i did buy each side from a different place though i'm not sure if that has anything to do with it. i also havent measured it, just looks different by eye

[jerseypug 1]

sorry, i ment 309gti anti roll bar not 306