Group 4 Sleeved Wheel Nuts

[Powers 13]

Does anyone know who sells these with a M12x1.25 pitch thread?

 

Here is a link to some M12 x 1.5 for sale:

 

http://rallynuts.com/motorsport/Wheel_Nuts...el_Nuts_833.asp

[taylorspug 7]

I got mine from Grayston, but you will need a trade account to deal with them direct.

[welshpug 1,655]

these from grayston engineering the right spec?

 

12mm 1.25 41/64" shank sleeve nut & washer Part No SN55

 

http://www.graystonengineering.com/wheelnutmenu.htm

[taylorspug 7]

I think those are what i have.

[Powers 13]

Taylorspug - Are you using them with group 4 wheel inserts?

If not I will have to take a few measurements.

[philfingers 5]

I had some grayston stuff perviously and the quality was shocking. There was a similar thread on here about them too. If you're using std wheels then I'd go with the PTS ones, Ab Motorsport stock them. Not cheap but when you use them you appreciate the quality. Not once do you ever get that 'oh sh*t i might have cross threaded it' feeling that you get with chocolate Lancia ones. Or the graystone ones I had on my westfield either

[taylorspug 7]

All im using on my car are the sleeved nuts and the washers. Ive had my front wheels drilled and reamed to fit the sleeve nuts. Basically ive just done it as i have no centre spigot to locate the wheel and the wheel wobble was horrific. The quality certainly isnt as good as it could be, but ive been using them for around 5k now without incident. Im just careful when i put them on.