309 Arms, 205 Shafts?

[floodys 4 1 Cars]

i had a quick look to see if this has been posted before but cant see anything, so, if i'm to fit 309 arms and use 205 shafts will it work? i think i've heard that it do's but they can "pop" out? can someone confirm. cheers

[Anthony 1,002]

Seems to be a tolerance issue - works fine for some people, others have problems with the shafts popping out on full lock/extension.

[floodys 4 1 Cars]

anyone know the measurement for a 309 arm and a 205 arm? just so i know in my heed the difference in length!!

[rapidcossie 0]

i have always fancied trying this

[Goliath 94]

This has been asked so many times before, there must be something coming up in the search. Personally i would use 309 shafts aswell. 309 wishbones are 9mm longer then 205 ones, or at least the ones I measured were.

[shalmaneser 26]

I'm running 205 shafts with 309 bones no problems whatsoever.

[welshpug 1,655]

10mm difference, in both arms and shafts IIRC, unsure how much further out the strut tops are.

[Fox 3]

I tried it, and one popped out while on full lock on a slope. Ruined a good shaft. Risk it if you want, luckily I was at home when it happened

[swordfish210 20]

I've done about 8,000 miles with 205 shafts and 309 bones and they're still going good.

[Tom Fenton 1,540]

Anthony sums it up perfectly above.

 

Try it if you want, but be aware that you may have a shaft pop out, you may not.

[rapidcossie 0]

my 205 shafts are practically new or I would get 309 shafts too.

[boombang 2]

 

watch from 2:30 onwards, hope this helps!

[Fox 3]

LOL!

[j_turnell 136 3 Cars]

 

watch from 2:30 onwards, hope this helps!