205 Rear Anti Roll Bar

[PaulJLLD 0]

Been looking though my shed full of peugeot bit and bobs today for my rear disc set up and came across a 106gti 24mm rear anti roll bar, i know you can get them to fit into a 205 rear beam, would it be to stiff in a beam that will have 21mm torsion bars? car will be used for road rallys. What you guys think?

 

Thanks paul

[RossD 44]

Try it and see! Suspension setup is very much a personal thing. It will probably make the turn in feel nice and sharp.

[pug_ham 244 3 Cars]

A common mix is 21mm TB's & a 23mm ARB so I can't see it being bad.

 

I run 20mm tb's & a 24mm arb on my road / track car with no complaints.

 

Graham.

[PaulJLLD 0]

A common mix is 21mm TB's & a 23mm ARB so I can't see it being bad.

 

I run 20mm tb's & a 24mm arb on my road / track car with no complaints.

 

Graham.

 

O.k thanks i will put it in when i build the beam up and see how it feels when i get then car back together.

 

Thanks paul