The Best Way To Fit Pins?

[A2TheA 0]

infact im looking into the aerocatches for my FG auto bonnet skin.

just looking for some pointers when cutting FG or tips on what to look out for.

 

i have read the article on the drivers website but i didnt know if aerocatches were different/harder to cut.

 

 

Thanks all

Edited September 2, 2009 by A2TheA

[swordfish210 20]

infact im looking into the aerocatches for my FG auto bonnet skin.

just looking for some pointers when cutting FG or tips on what to look out for.

 

i have read the article on the drivers website but i didnt know if aerocatches were different/harder to cut.

 

 

Thanks all

 

Wear a dust mask The FG dust gets everywhere. I fitted 4 aerocatches to my FG bonnet (and a Dzeus clip to the front centre to stop it lifting) and it was pretty easy. I just marked it out with permanent pen then used a dremel to cut it out

[EdCherry 34 1 Cars]

What mark said.

 

I got a dremel hear if you want to borrow it aaron, might need to pickup some more 'consumables' for it though as its last escape used alot of discs!