Stop Light - Mot Fail?

[madspikes 41 1 Cars]

Trying to get the pug ready for an MOT on tuesday, and working my way through a number of issues, one of such issues is the STOP light. The stop light and the coolant warning light both come on, no matter what I do, the lights will not go out. My question is this lightly to cause an MOT fail? If its not I'm not too worried about it for the moment, however if it will then I best fix it!

 

mad.

[welshpug 1,657]

disconnect the level sender and see what happens?

[madspikes 41 1 Cars]

There is a level sensor, must have missed that one!

[welshpug 1,657]

looks like you have a Phase 2? faults with them are fairly common I think, can;t remember if that will bring the stop light on.

[wracing 19]

urm why not take the bulb out till after the mot :S

 

james

[sub205 5]

urm why not take the bulb out till after the mot :S

 

james

the level-sensor often gets stuck because of bad coolant mixture. disconnect and clean it.

if the red warning light (high temperature) keeps lighting, there is a cable defect somewhere that pulls this cable to ground.

[Leon 24]

No.

[jimistdt 1]

No.

 

No what?

 

Do you mean 'No, the STOP light being lit will not mean an MOT failure' or 'No' to something else?

[madspikes 41 1 Cars]

Thanks guys... Problem not fixed so to speak, more 'over come'.

[VisaGTi16v 1]

Probably 'fixed' in the same way ive always 'fixed' ZX Abs warning light issues......

Edited August 20, 2009 by VisaGTi16v