Jump to content

  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

    • Sign In
    • or

davenport

[Project] The Rattlebox

By davenport, in Large Scale & Special Projects

Recommended Posts

barneys66    122   1 Cars

barneys66
Posted

Great work - subscribed !! Will have a read through of the entire thread when time allows..

 

Alt looks like a Denso, popular with Rodders, but Googling suggests that one (100211-1670) is a 40a. More here, but they get crazy pricey.. http://www.brise.co.uk/Denso/

 

One of the comments about the little uns is they only generate power at higher revs, but I guess the right pulley could overcome that..!

Share this post

Link to post
Share on other sites

allanallen    528   2 Cars

allanallen
Posted (edited)

Great work - subscribed !! Will have a read through of the entire thread when time allows..

 

Alt looks like a Denso, popular with Rodders, but Googling suggests that one (100211-1670) is a 40a. More here, but they get crazy pricey.. http://www.brise.co.uk/Denso/

 

One of the comments about the little uns is they only generate power at higher revs, but I guess the right pulley could overcome that..!

That's the fella! The 40/45 amp ones done start making power until they're above about 2k from memory, similar to most alternators. Edited by allanallen

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

This 1 is labelled as a lucas item iirc.. i'm not convinced by my dads claims but will investigate more next time i'm down the shop

  • Like 1

Share this post

Link to post
Share on other sites

rallyeash    155

rallyeash
Posted

You'll have fun getting in and out with those door bars and gussets! Mines hard enough! But great work though.

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

20160124_130450_zpspp2t9hjk.jpg

 

 

20160124_135126_zps6cimgmkg.jpg

 

 

20160124_131614_zpsq7f8iirv.jpg

 

 

20160124_140100_zpsuzezyxdi.jpg

 

 

20160124_140042_zpszc1htpor.jpg

 

 

 

Got me gussets.....

 

 

20160119_163238_zps7yzha1iv.jpg

 

 

 

Also decided to bung up all the factory floorpan holes and in a moment of laziness got laser cutter fired up at work and chopped out some discs to make my life a bit easier...

 

 

20160119_165731_zps7q5481my.jpg

  • Like 1

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

Ello chaps..

 

Remember them discs??

 

Got the floor holes filled in:

 

FB_IMG_1462892889556_zpswydgqsho.jpg

 

 

Then got a load more cut at 20mm round and with the aid of a step drill started going round the inner wings opening everything up to 20mm and plugging them all up:

 

20160417_123953_zpsdoqvnan2.jpg

 

 

Finally bit the bullet and took the lip RIGHT off the scuttle area too, the cage blocks off the std drain points so there was a risk of the scuttle becoming a bird bath:

 

 

20160508_130727_zpsgqnfxxco.jpg

 

20160508_131415_zpspgitmdvu.jpg

 

20160508_131338_zpstx2wlmci.jpg

 

 

Finally, the wishbone gusset things are all welded in:

 

FB_IMG_1462892874161_zpsqkvimjkh.jpg

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

Brace yaself... its a biggy...

 

Spits out! (Just like your missus):

 

 

20161030_123241_zpsvju7o1wc.jpg

 

As always Robin Hunter was called in to move the shell with his covered trailer, and it was fitted up on the spit:

 

20161104_101856_zps7rh2mj7q.jpg

 

 

Then Zane and his 2 helper set to on the underside, my prep work saved him a lot of time (and me money) and after a bit of thinners and scotchbrite was applied the bay and underside was in the bay for a coat of etch and 2 coats of high build primer..

 

received_1242144595855844_zps9wmdl7t7.jp

 

 

received_1242144965855807_zpsddgyp3sw.jp

 

Monday should see fresh seam sealer thrown down then stonechip in the arches and a few litres of blue+laquer..

 

Happy times

  • Like 3

Share this post

Link to post
Share on other sites

allye    530   3 Cars

allye
Posted

Great update, seeing final assembly will be enjoyable this end!

Share this post

Link to post
Share on other sites

Reebmit    51   4 Cars

Reebmit
Posted

Great update, seeing final assembly will be enjoyable this end!

Yep, I second that ☺

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

received_1246787832058187_zps4obndeau.jp

 

 

received_1246786792058291_zps8dcakka1.jp

 

 

 

received_1246786925391611_zps9khmrcqz.jp

 

 

 

received_1246787502058220_zpsfvegngtp.jp

 

 

 

received_1246788858724751_zpsk99wd69z.jp

 

 

 

received_1246788522058118_zpsqiozzwk6.jp

 

 

 

received_1246788138724823_zpszcwtrdha.jp

  • Like 3

Share this post

Link to post
Share on other sites

calvinhorse    870

calvinhorse
Posted (edited)

Jesus! That's mint!

Edited by calvinhorse

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

So... theres DEFINITELY a light at the end of the tunnel now....

 

20161118_181556_zps0aibich4.png

 

 

 

received_1258552100881760_zpscqfilpvj.jp

 

 

 

received_1258552290881741_zps5ht0smlg.jp

 

 

 

received_1258551974215106_zpsesvabjo9.jp

 

 

 

received_1258551637548473_zps1yzvb545.jp

  • Like 1

Share this post

Link to post
Share on other sites

barneys66    122   1 Cars

barneys66
Posted

What a great finish !!

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

 

 

This morning i popped down to the bodyshop to take the shell off the rotisserie and back onto the dolly for the final prep and painting to be done..

 

Couldnt resist wheeling it outside for a look in the sunlight..

 

 

 

20161119_122625_zpspr1gc5y5.jpg

 

 

20161119_122638_zpszfohbonf.jpg

 

 

20161119_122656_zps7pom6ryy.jpg

  • Like 2

Share this post

Link to post
Share on other sites

allye    530   3 Cars

allye
Posted

I can't tell you how long I've waited for this thing to have its final assembly. Watching all those shiny thins being bolted into primer for years!

  • Like 2

Share this post

Link to post
Share on other sites

Sam    4

Sam
Posted

Same! I've been subscribed for years. Good to see it coming together :)

  • Like 1

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

Zane and the boys have been kicking on... the outside needed a fair bit of TLC, 20+ years have left its toll on the 3/4s...

 

 

 

 

received_1264529320284038_zps1hd1pn0m.jp

 

 

received_1264529680284002_zpszq8tppin.jp

 

 

received_1264529390284031_zpsa9rrshtk.jp

 

 

 

And once they're given some attention, its etch and high build primer...

 

 

received_1265041370232833_zps3va6qurr.jp

 

 

received_1265041456899491_zpstndishqg.jp

Share this post

Link to post
Share on other sites

Sandy    191

Sandy
Posted

Wow, you owe them a drink or two.

Share this post

Link to post
Share on other sites

davenport    51

davenport
Posted

Well today was collection day..

 

 

 

20161202_141915_zps8pguztj4.jpg

 

 

 

20161202_141939_zps5tzndhhv.jpg

 

 

And after a 20minute drive....

 

She's home and ready for assembly

 

 

20161202_145459_zpsdmnlpvbz.jpg

  • Like 1

Share this post

Link to post
Share on other sites

calvinhorse    870

calvinhorse
Posted

Building that up is going to be the most satisfying job ever!

  • Like 1

Share this post

Link to post
Share on other sites

dcc    855

dcc
Posted

Devestated this wasnt a 205.

 

Makes me want a s1 106...

Share this post

Link to post
Share on other sites

welshpug    1,657

welshpug
Posted

 

Makes me want a s1 106...

 

 

would you even fit?! :P

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Go To Topic Listing Large Scale & Special Projects
×