Pug Part Numbers?

[dk73 1]

Hi guys,

 

Been down the road to the dealers and wanting to order gearbox bits and bobs.

 

Im wanting the bits to make my speedo work again.

 

The problem is my cars was in the past a 1.6 gti so the dealers say to me sorry for the correct part numbers we need your chassis

 

number, obvious not got one.

 

I need to make sure these are the correct part numbers its essential that these are correct has i use my car as a daily drive.

 

Are these the correct numbers:

 

2643 04 01 tachometr screw 19 dts,

 

2649 11 01 control pinion 17 dts,

 

2641 50 01 control support,

 

2644 04 01 tacometer seal,

 

2645 12 01 ring-seal 24 tore 3.

 

If you can all have say to guide me in the right direction, please remember its a 1.9 gti phase 2.

 

Kind regards dk73.

[welshpug 1,657]

sounds correct, I dont know if the 1.6 and 1.9 are any different.

 

always amuses me when people say they've been asked for a VIN, all you get when you input a 205's vin is that it tells you if its before or after 1991, no other details are filtered at all, DOH!!

[dk73 1]

sounds correct, I dont know if the 1.6 and 1.9 are any different.

 

always amuses me when people say they've been asked for a VIN, all you get when you input a 205's vin is that it tells you if its before or after 1991, no other details are filtered at all, DOH!!

 

Cheers welshpug.

[Swazy 0 1 Cars]

sounds correct, I dont know if the 1.6 and 1.9 are any different.

 

always amuses me when people say they've been asked for a VIN, all you get when you input a 205's vin is that it tells you if its before or after 1991, no other details are filtered at all, DOH!!

 

same here i´m working in the local peugeot garage

 

sometimes very hard to find the right part numbers, espacially if it´s a J5