Clutch Torque Setting

[Pob 1]

Hi all,

 

I've tried searching and looking at the clutch changing artical but there is no mention of torque settings for the pressure plate to flywheel. I've had a look on the net and came across 15ft/lb, is this right? Doesn't seem very tight

 

Thanks,

Dan

[welshpug 1,657]

18 lbft according to my haynes , they're only M8 bolts, don't forget the threadlock.

[Pob 1]

18 lbft according to my haynes , they're only M8 bolts, don't forget the threadlock.

 

Thanks for the reply, I did them at 25Nm (Autodata) with threadlock.

 

Thanks again,

Dan