Gti6 Clutch

[2052006 10]

I have put a proper gti6 clutch on my engine and am trying to work out how the cable fits. Am I being thick, or does the cable have to go under the gearbox/engine and round to the other side, to pull the arm instead of pushing it?

 

I can't see how it will work otherwise?

 

I am using a BE3 cable which I understand to be correct.

[davepug205 7]

There is a black bracket that bolts onto the front of the box that holds the cable then the bush clips in the arm, tho mine is a be1 cable so might be different

[2052006 10]

I understand that bit and have the bracket on the box - what way is your cable routed?

[davepug205 7]

The cable routes along the subframe at the back then over the gearbox near the battry tray to the front of the car.

[2052006 10]

Thanks. So what way does your clutch arm move when disengaging the clutch - towards the rad or away?

[S@m 156]

I'm using a Gti-6 clutch in my 205 8v turbo, the gearbox is a BE3 from a 306 1.8 16v, but im using the BE1 cable, which works fine, I thought you had to use the BE1 cable for this clutch arrangement, but maybe im wrong?

 

Sam

[2052006 10]

Thanks - I've got it working (BE3) - I was just being thick, as suspected...