Company Suggestions

[dave_gti 0]

I dont know if this is right section, but here goes.

 

I got a 205 1.9 mi16. Des developments had done some work but it isnt running right, and theyve gone out of business before i went back.

 

Its running omex engine management and needs to be set up, but i been thinking i might aswell just stick tb's on it as i got the omex. So im looking for a company that could fit them and set the car up properly and i was hoping someone on here would have good suggestions. Ive tried shenpar which seemed very helpful, but they hadnt contacted me as promised, and i cant get hold of the fella i was talkin too.

 

Also, which is the best option to go for best performance, ive looked around and there is loads of different options to go for.

[whizzer71 0]

I have one suggestion for you....Miles,that said he's a fair distance from you

 

[Miles 331 1 Cars]

If you;ve got the loom then there's not much needed to fit the bodies, it's almost plug and play as I've done a car pretty much the same but with a GTi6 engine but I made the loom so we could convert to bodies in a couple of hours pretty much.

I would find a good mapper first as they always normally carry out extra work but not the cheapest option, one thing thou they cannot complain about anything being wrong before mapping

But by all means give me a call if you need any info/prices

[sideways danny 0]

Only person I'd even think of asking to map Omex would be Andy Cutler of GDI. His attention to detail is far and away the best you will find. He does a great deal of mapping for Omex themselves, and a number of professional tuning outfits. I can put anyone in contact that wants

[andyjstone 6]

Only person I'd even think of asking to map Omex would be Andy Cutler of GDI.

 

Where abouts in the country is he?

[sideways danny 0]

Where abouts in the country is he?

 

Cheltenham currently. Will travel though

[andyjstone 6]

Cheltenham currently. Will travel though

 

Could you please PM me his number, could be interested.

 

Andy

[sideways danny 0]

email or MSN madmonkey116@hotmail.com is best