Fitted Gti6, Redundant Plugs

[djinuk 2]

Ok, ive fitted my gti6 engine using spikys loom that has worked a charm.

 

I have 3 plugs left over, one is a white plug which is the aircon, no problem.

 

But i still have these two plugs hanging around the throttle body area, what are these used for?

 

[Anthony 1,003]

Is the blue one possibly the one that normally connects to the PAS pipe pressure sensor? If so, that's not needed for 205 conversions.

[welshpug 1,661]

black one is a "spare"

[djinuk 2]

confused.. its a spare?.. am i missing somthing obvious

[welshpug 1,661]

no, every RS engine has this spare plug.

[djinuk 2]

surely that a bit wierd :S

[welshpug 1,661]

yup!

[rapidcossie 0]

its defo a spare as I cut it off my mates 306 and used it to connect the oil press switch on my 205

[Miles 331 1 Cars]

It's a spare, I always remove all these plug's from the loom, It's like you don;t need the vacume take off on the manifold, The pump provides more than enough and it means less pipes

[SurGie 54]

It's like you don;t need the "vacume take off on the manifold", The pump provides more than enough and it means less pipes

 

 

What do you mean exactly ?

Inlet manifold ?

[Miles 331 1 Cars]

Yes just blank off the take off by the Map sensor, If you think Derv's run the vacume pump only and when I tested the pump for the amount of vacume it makes it's allot more than the inlet will ever do,