Oil Sensor Screws Into Gti6 Sump (help)

[tombo 0]

hello,

 

i have just put the baffled 306 gti-6 sump onto my mi16 engine, however when i went to put the oil temp sensor into the gti6 sump the threads were wrong. i have tried several motor factors local to source a new one.

 

does anyone know where i can get a new sensor to suit the gti6 sump? and if so do you know a part number, cost etc?

 

many thanks

 

tom

[Flix 0]

You need the later sender, 0242-81, about £16 from Pug.

[tombo 0]

flix, your my new hero

[tombo 0]

unfortunatly peugeot only sell this item for 42.58 problem is, the connection for the mi16 oil temp switch is single pin. and the gti6 oil temp switch has a 2-pin connection.

 

has anyone used a gti6 sump on an mi16 alloy block engine and loom before, if so what oil temp switch did you use. im close to taking the gti6 sump back off and using the mi16 one which would be a bitter disapointment as i wanted the baffled sump

 

thanks

tom

[Flix 0]

Thats wierd, only charged me £16.

Cut the plug off and crimp a ring terminal on.

That part number is for a late model 205 sender.

Edited June 16, 2009 by Flix

[tombo 0]

so you use the late 205 gti oil temp sender in your gti6 sump? the price i gave is for a gti6 oil temp sensor. if the late 205 gti oil temp sensor fits then thats tidy darts lol

 

thanks tom

[Flix 0]

0242-81 is a late 205 GTI sender. Same thread as GTI6 sump, M14 I think.

Has a screw terminal that will go on your wiring, M4 thread.

This does fit and works with original gauge.