Reving To High When Warm.

[dk73 1]

Hi guys,

I've a 205 1.9 gti phase 2.

The problem ive got is i start her from cold up at two thousand rpm, then after 4 mins idles down great about a thousand.

Then i drive her down the road then come to a junction shes idleing at two thousand revs, ive had a new ecu temp sensor and ive checked the inlet for any leaks or air,

ive also fiddled with the idle screw with no joy.

So if any one can tell me what to do next would be great? regards dave.

[CosKev 16]

Plenty of threads on idling issues if you search

 

Check oil cap and breather pipes for damage,clamp the pipe from SAD valve and see if idle drops,take off throttle body and clean it up inside,check throttle cable is not too tight or sticking.

 

More detailed answers avail if you use search function

[dk73 1]

Plenty of threads on idling issues if you search

 

Check oil cap and breather pipes for damage,clamp the pipe from SAD valve and see if idle drops,take off throttle body and clean it up inside,check throttle cable is not too tight or sticking.

 

More detailed answers avail if you use search function

 

Good man, i will give it a go, cheers.

[dk73 1]

Plenty of threads on idling issues if you search

 

Check oil cap and breather pipes for damage,clamp the pipe from SAD valve and see if idle drops,take off throttle body and clean it up inside,check throttle cable is not too tight or sticking.

 

More detailed answers avail if you use search function

 

Ive now checked all the pipes and there in good nick?

 

Whats the tiny little screw for on the sad valve for?

 

Not the idle screw the smaller one?

 

By the throttle body?

[dk73 1]

Ive now checked all the pipes and there in good nick?

 

Whats the tiny little screw for on the sad valve for?

 

Not the idle screw the smaller one?

 

By the throttle body?

 

Sort of sorted this problem, i know whats happening.

 

When i put my foot to the floor the peddle sticks down for about 2 secs.

 

Had a look under bonnet has to the throttle body the caseing that holds the cable keeps popping out of the hole,

 

Hard to describe but the black bit thats the adjusting bit inside that?

[CosKev 16]

Take your cable off and have a good look at it.

 

Check to see why its doin what it is.

 

New ones here:

http://www.pugspares.co.uk/PartsSearchResu...s&Submit=Go

 

[dk73 1]

Take your cable off and have a good look at it.

 

Check to see why its doin what it is.

 

New ones here:

http://www.pugspares.co.uk/PartsSearchResu...s&Submit=Go

 

 

Nice one cozkev.