24seven 104 Posted May 17, 2009 Am I ok to use the rear belt mounting point to fix the rear extension from a 4 point harness? I've a pair of harnesses that I'm going to use, one has a single extension from both shoulder straps and the other has 2. Can I just use the mounting point that the rear belts used to use for these? Share this post Link to post Share on other sites
Atari Boy 11 Posted May 18, 2009 I do and it is fine. Share this post Link to post Share on other sites
MrG 3 Posted May 18, 2009 I think it depends on the use. If its for competition use you may have an issue I think. Share this post Link to post Share on other sites
24seven 104 Posted May 18, 2009 just for road use & track days at the moment. Eventually I want to put a cage in there and will probably have a bar to wrap the belts round properly. As long as it's not a bit no-no on the road then I'll use the rear mounts for now. Share this post Link to post Share on other sites
timb1046 1 Posted May 19, 2009 it should be fine, a guy who i used to go to collage with used to get his through the MOT like that. Share this post Link to post Share on other sites
philfingers 5 Posted May 19, 2009 it's strong enough for std belts. The issue with harnesses is if the seats are a long way back and/or not low enough there is too much angle on the straps which in the event of a heavy frontal basically can crush the seat and the person in it. Which is the reason why for MSA rules it's not advisable. Tho cars do go through scrutineering and/or get log books without being correctly done Share this post Link to post Share on other sites
