Xu 10 Alternator Fit A Mi16 Engine

[yorkshirekowboy 19 1 Cars]

hi as above, its from a 306 2.0 8v, juts wanting to know if it would fit.

 

thanks

 

dan

 

ps is the type with an internal fan.

[jimbean 0]

hi as above, its from a 306 2.0 8v, juts wanting to know if it would fit.

 

thanks

 

dan

 

ps is the type with an internal fan.

 

 

just look at the mounting points fella

 

if the are the same angles on the alt it will be fine

[welshpug 1,657]

depends which Mi16 you mean, I know they'll fit the iron block.

[yorkshirekowboy 19 1 Cars]

just look at the mounting points fella

 

if the are the same angles on the alt it will be fine

 

 

a guys selling one, can see it celarly in the picture. im sure the 8v xu10 are fine, its the xu10 16v ones that are different casing

[Richie-Van-GTi 71 2 Cars]

Im selling it, its a mitsibushi alternator and came of a 2.0 8v engine in a 306.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...s=tab%3DSelling

[yorkshirekowboy 19 1 Cars]

Im selling it, its a mitsibushi alternator and came of a 2.0 8v engine in a 306.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...s=tab%3DSelling

 

its an alloy blocked mi16

[jimbean 0]

a guys selling one, can see it celarly in the picture. im sure the 8v xu10 are fine, its the xu10 16v ones that are different casing

 

 

whats up with yours like?

 

don`t know if it will deffo be the same...

 

it would be a suck it and see moment

[yorkshirekowboy 19 1 Cars]

whats up with yours like?

 

don`t know if it will deffo be the same...

 

it would be a suck it and see moment

 

 

the bearings are whining mate. bought it anyhow.

[Anthony 1,003]

They certainly fit 1.6/1.9 8v's as I fitted one to my last 205, so I don't see why it wouldn't fit a 1.9 Mi16 as well (given than an 8v alternator will fit)

 

You'll need to either swap the main power feed cable or change/enlarge the ring terminal on the end, as the XU10 alternators have a thicker stud meaning the XU5/XU9 cable won't fit over. Also, from memory the warning lamp wire is a ring rather than spade connector, but that's easy enough to sort out.

 

XU10 16v alternators are a different fitment.