Lost Lower Engine Mount Fork Bolts

[djinuk 2]

whilst doing my gti6 engine conversion i have lost both my lower engine mount fork bolts. the one that secures it to the subframe, and the one that bolts though the engine mount. Are these bolts going to be high tensile etc? or pretty much run of the mill spec bolts? In other words should i go to peugeot for new ones, or simiply a quick trip to masseys for them Thanks in advance.

[GTI6BOY 29]

about £1.50 new from pug anyways and was in stock

Edited May 13, 2009 by GTI6BOY

[Tom Fenton 1,542]

The one through the lower mount is an oddball as it has a long shank and a short threaded length.

[djinuk 2]

ah sweet, ok then.. its going to be fun trying to explain to pug which bolt i need

[pug_ham 244 3 Cars]

ah sweet, ok then.. its going to be fun trying to explain to pug which bolt i need

From looking on service box the rear one through the subframe is;

• 1803.42 capscrew diam 12x175-58
  
• 6939.77 self locking nut 12 x 175-15-18.
  

 

The one through the lower mounting is;

• 
  
• 1803.33 capscrew diam 10x150-72
  
• 6935.53 self locking nut diam 10x150-9-17
  

Graham.

[djinuk 2]

thank you so much, i think its time i learned how to access service box.. thanks though man

[Masekwm 2]

The one through the lower mount is an oddball as it has a long shank and a short threaded length.

 

Is it? I'm sure the one in mine is threaded all the way along the shank. Best change that then!