Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
xxvickyxx

Front Washers Will Not Work :s

Recommended Posts

xxvickyxx

hello

 

my front washers wont work it use to pump but now it dose nothing at all. i thought it might be the pump but change the back on to the front and it still dose nothing. i have looked at the fuses and they are all fine no problems but now i am stuck very confused could do with some help please ??

Share this post


Link to post
Share on other sites
Goliath

Its a dodgy earth, I think its the one on the front headlamp panel on the N/S (between headlight and radiator), try unplugging the crap connector and cleaning it and see if that helps.

Share this post


Link to post
Share on other sites
xxvickyxx
Its a dodgy earth, I think its the one on the front headlamp panel on the N/S (between headlight and radiator), try unplugging the crap connector and cleaning it and see if that helps.

 

 

thank you i will try that and see what happens and let you know :ph34r:

Share this post


Link to post
Share on other sites
SurGie

It could also be the wiper stalk that you use to start the jet wash and wiper's, they always go...

The metal connector inside the wiper stalk wears out for jet wash, yet wipers can still work as they have differant

connector's inside the stalk ok.... :ph34r:

Share this post


Link to post
Share on other sites
Paulmac19

I had the same problem with mine i changed the motor and changed the stalk

turned out to be nothing more than the plug that fits to the washer pump

make a simple 12v tester and see if its getting a live and neg feed to it

if not peel back a bit of the insulation further up the wire and try again

i ended up cutting my plug off and fitting two insulated spade terminals done the trick and got the washers working!

Share this post


Link to post
Share on other sites
chris-stdt

Mine was the same ,pump would work straight off the battery but not work off the plug so i cut it off and fitted two spade connectors and its been fine since

Share this post


Link to post
Share on other sites
mikespug

snap just done mine works fine now :P but the water just go`s right over the car don't even touch the window :wub:

Share this post


Link to post
Share on other sites
DamirGTI

Just like fuel injectors , scale sediment formation usually blocks window washer jets :wub: try poking washer jet holes with some thin wire in order to clean/unblock the holes from scale .. or remove them and get them cleaned on the ultrasonic machine :P

 

Damir

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×