Door Seals

[Moz_Goodwood 0]

whats the best to stick the rubber seals onto the metal work? as mine are coming away slighty in some places

 

would superglue be any good? as ive got some lying around

 

cheers

 

paul

[willmounsey 1]

I dont see why superglue wouldn't work but would it eat into the rubber after a while??

Tigerseal good sticky stuff and if the rubbers were replaced in time tigerseal can be removed quite easy with a bit of heat.

 

Will

[SurGie 54]

Try using flexible silicone, it'l stick it well and is water proof and easily removed, JD...

[joe1joe 3]

do u mean the door seal? if so u can take it off and squeeze it with ur fingers which close up the gap(there is a metel strip in there) or you are on about somthing esle ......