Ph 2 Rear Lights

[mikespug 1]

can someone please tell me where the earth go`s on the ph2 ??

 

doing the rear light swap on my ph1 but couldn't get the wire loom so got to start fresh and work out wire by wire

 

if i can find the earth point i should be ok

 

thanks for any info mike

[pugit666 2]

are you looking for the earth block on the body? its on the passenger side

[mikespug 1]

no mate want to no where the earth go`s on the lights

[j_turnell 137 3 Cars]

http://www.205gti.com/techrearlightUK.htm

[mikespug 1]

http://www.205gti.com/techrearlightUK.htm

 

 

your a life saver or should i say rear light saver was going to give up and ebay them

 

thanks very much mate o u 1

 

mike

[pug_ham 244 3 Cars]

http://www.205gtidrivers.com/articles.php?...=m-phase2lights

 

Graham.

[Sanchez 0]

I've been looking at the guide on the site and I've got everything to do the conversion. Is there a certain size the spade connectors have to be?

[pug_ham 244 3 Cars]

I've been looking at the guide on the site and I've got everything to do the conversion. Is there a certain size the spade connectors have to be?

You can't buy the correct size spade connectors afaik, they need to be 5mm iirc but those you can buy from motor factors are 6mm so need filing down to fit the plug.

 

I have since changed how I make the end of the conversion loom to use a modified connector from a scrapped 205 with the wires joined into that & its plugs straight in.

 

http://forum.205gtidrivers.com/index.php?a...ost&id=4450

 

Graham.