Ignition Barrel

[carlh.1 8]

does any1 know how to remove the ignition barrel after ive taken out the small screw from the top

[Anthony 1,003]

There's a couple of protruding lugs on the bottom of the barrel that can be depressed with a small screwdriver when the key is turned part-way, and then the barrel pulls out, taking time to avoid snagging the wiring (particularly if it's been butchered by an alarm installer)

[Ryan 99]

You have to put the key in and turn it to a position half-way between the first and second click (there might be a line on the barrel to show where), then you should be able to push the locking pin in and slide the barrel out.

[carlh.1 8]

ah, those 2 under the bottom! thanks alot