Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
SteveW

[trackday_prep] 205 Gti-6 Trackcar Project

Recommended Posts

djinuk

not sure if that grey is high build, but due to using the grinder i imagine the metal has a fair few ridges etc, give the full bay a heavy coat of high build primer and flat it down to 800 wet n dry , will leave it looking real smooth and ready for paint.

 

Spiky also did my loom :lol: just gota fit it yet

Share this post


Link to post
Share on other sites
SteveW
Looking good. I bet your ears are ringing from using an angle grinder without ear defenders.

 

Yeah they were, silly really should have got some defenders

 

 

not sure if that grey is high build, but due to using the grinder i imagine the metal has a fair few ridges etc, give the full bay a heavy coat of high build primer and flat it down to 800 wet n dry , will leave it looking real smooth and ready for paint.

 

Spiky also did my loom :lol: just gota fit it yet

 

Was using the angle grinder with a wire brush atachment so its smooth enough, will have a look tonight to see how its turned out. Not to bothered really about the quallity of the finish as she's only a track car and its going to be matt black not to produce any glare.

 

Spiky's a diamond, glad he lives pretty close as he has a bit of work to do on my car :)

Share this post


Link to post
Share on other sites
SteveW

Had a few hours in the garage earlier, dropped the subframe, took the dash out, removed the old brake pipes

 

IMG_1665.jpg

 

IMG_1664.jpg

 

IMG_1663.jpg

 

my 6 year old son was in the garage with me for a while, i went round the back of the car and found this

 

IMG_1666.jpg

 

should be sorting the rust on the front this week

Share this post


Link to post
Share on other sites
SteveW

gti-6 front calipers and standard 205 gti rear calipers now painted

 

IMG_1667.jpg

 

mintex 1144 pads ordered today. hope to get her back to a rolling shell in 2 weeks at the latest

Share this post


Link to post
Share on other sites
SteveW

Made some more progress over the last few days, rusty front all sorted thanks to the the old boy, got the subframe on, took the servo out to give it a lick of paint

 

IMG_1671.jpg

 

hubs, coilovers, 309 arb and gti-6 calipers/ disc's on

 

IMG_1672.jpg

 

IMG_1673.jpg

 

started on the bay after the welding had been sorted

 

IMG_1678.jpg

IMG_1679.jpg

IMG_1677.jpg

Share this post


Link to post
Share on other sites
SteveW

IMG_1675.jpg

 

IMG_1674.jpg

 

IMG_1680.jpg

 

IMG_1681.jpg

 

then done a bit to the inside

 

IMG_1685.jpg

 

IMG_1686.jpg

 

IMG_1689.jpg

 

trial fitted 1 seat so i can work out where to run the rear brake line and where to mount the bias valve.

Share this post


Link to post
Share on other sites
SteveW

fitted the seat, the little fella had to get in there

 

IMG_1691.jpg

 

IMG_1694.jpg

Share this post


Link to post
Share on other sites
Spiky

the car look much much much better :)

 

inside is a million times better :D

Share this post


Link to post
Share on other sites
SteveW

great progress today, braking system all but finished. bleed the system tomorrow

 

IMG_1695.jpg

 

IMG_1696.jpg

 

IMG_1700.jpg

 

IMG_1706.jpg

 

IMG_1702.jpg

 

IMG_1705.jpg

 

IMG_1703.jpg

 

IMG_1704.jpg

Share this post


Link to post
Share on other sites
Baz

Coming along nicely! :lol:

Share this post


Link to post
Share on other sites
Cloverleaf

Looking good. I'm not looking forward to doing my front brake lines with the engine in.

Share this post


Link to post
Share on other sites
Spiky

looking good matey :wacko:

 

you'll have the engine fitted in no time :wacko:

Share this post


Link to post
Share on other sites
tracktoy

good going dude, be back on the road in no time at this rate :wacko:

Share this post


Link to post
Share on other sites
SteveW
good going dude, be back on the road in no time at this rate B)

 

moving along quite well at the moment, hows my bracket looking :)

Share this post


Link to post
Share on other sites
tracktoy
moving along quite well at the moment, hows my bracket looking ;)

 

 

bet you think i'd forgotten about it :) (and you'd be right B) )

 

will be in the garage most of the day thursday so hope thats not going to hold you up too much (the car might be finished by then the rate your going :o )

Share this post


Link to post
Share on other sites
taylorspug

Glad the coilovers turned up fine Steve! :)

Share this post


Link to post
Share on other sites
Anthony
IMG_1705.jpg

Any particular reason you did the solid brake pipe like that, rather than using the proper bracket for it, which would also have secured the handbrake cable? I don't think that'll pass an MOT as it stands...

Share this post


Link to post
Share on other sites
SteveW
Glad the coilovers turned up fine Steve! :)

 

They did and im pleased, cheers. i did send a pm when i got them

 

 

Any particular reason you did the solid brake pipe like that, rather than using the proper bracket for it, which would also have secured the handbrake cable? I don't think that'll pass an MOT as it stands...

 

will check it out later, brackets must be in the scrap box

Share this post


Link to post
Share on other sites
taylorspug
They did and im pleased, cheers. i did send a pm when i got them

 

Yeah i did get that, i just dont get time to answer all of them as i get quite a few each day! :blush:

 

Glad you are happy anyway, have you stuck with the 225lb springs that were already fitted to them?

Share this post


Link to post
Share on other sites
SteveW
Yeah i did get that, i just dont get time to answer all of them as i get quite a few each day! :wub:

 

Glad you are happy anyway, have you stuck with the 225lb springs that were already fitted to them?

 

Yep stuck with the 225lb springs as im fitting a gti-6 lump

Share this post


Link to post
Share on other sites
SteveW
Any particular reason you did the solid brake pipe like that, rather than using the proper bracket for it, which would also have secured the handbrake cable? I don't think that'll pass an MOT as it stands...

 

havent got the brackets, checked everywhere and dont remember them on the old beam, handbrake cable is fine, its cable tied into the routing clips on the tank. Will check with my mot chap, if its a problem it will be changed

Share this post


Link to post
Share on other sites
welshpug

it'll rub on the tyre without the bracket on the trailing arm, if you can;t find them you can use a bracket of a 306 or xsara, doesn't even have to be discs.

Edited by welshpug

Share this post


Link to post
Share on other sites
SteveW

Big thanks to the father in law (better known as the old boy) for fitting and welding the cage, cracking job i'm really pleased

 

IMG_1707.jpg

 

IMG_1708.jpg

 

IMG_1709.jpg

 

IMG_1711.jpg

 

IMG_1712.jpg

 

give the cage another lick of paint tomorrow night

Edited by SteveW

Share this post


Link to post
Share on other sites
Spiky

looking good dude :wub:

 

 

wont be long now :D

Share this post


Link to post
Share on other sites
SteveW
looking good dude :wub:

 

 

wont be long now :D

 

cheers dude, painted all the inside rear last night in matt black, looks loads better, fitted the eyes for the harnesses

the base plate for the center eye by the handbrake is way to big, dont know wether to cut it down or put a nut on it

with washers

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×