Questions About Oil Filler Cap

[MerlinGTI 3]

I was wondering if there were any different oil filler caps that are interchangable with an 8v's?

 

Reason I ask is im about to re-route the vent pipes, so a cap that has 2 equal sized 'barbs' rather than the one huge & 1 small or even just 1 barb rather than the two would make things much neater.

 

Failing this does anyone know what size pipes fit the standard 8v filler cap? I know the smaller one needs an 8mm ID pipe....

 

Cheers

[engine killer 6]

I was wondering if there were any different oil filler caps that are interchangable with an 8v's?

 

Reason I ask is im about to re-route the vent pipes, so a cap that has 2 equal sized 'barbs' rather than the one huge & 1 small or even just 1 barb rather than the two would make things much neater.

 

Failing this does anyone know what size pipes fit the standard 8v filler cap? I know the smaller one needs an 8mm ID pipe....

 

Cheers

 

 

the Mi16 (XU9J4) may suit your need.

[MerlinGTI 3]

Nice one engine killer

 

Dont have a part number do ya by any chance?

[Rom 0]

025837

[MerlinGTI 3]

ta

[Miles 331 1 Cars]

Expensive

[MerlinGTI 3]

oh oh

 

How expensive? my service box access got removed.

[jplautomotive 0]

26.13 plus vat

[engine killer 6]

oh oh

 

How expensive? my service box access got removed.

 

use the 8v cap with a screw to block one hole and stick a breather at the hole, that was what i did

[MerlinGTI 3]

use the 8v cap with a screw to block one hole and stick a breather at the hole, that was what i did

 

Ghetto I will pull my trousers down and hand over my wallet to pug methinks.

[Rom 0]

There no other XU that has a one port cap ?

[Ryan 99]

The mi16 cap is probably a lot cheaper from a motor factors, it's not a dealer-only part.

[MerlinGTI 3]

its getting across to them what one you need though withought a reg, make model year or part # (one they will reconise anyways, can they do it from the pug part number?)