Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
hawkesy226

Would Super Lites/ Mini Lights Fit On A 205?

Recommended Posts

hawkesy226

i seen on the cover of this months fast car a 106 with mini lites on it and just wondering what i would need to make them fit to a 205?

Share this post


Link to post
Share on other sites
Baz

Ones the right size and offset to fit over the brakes and without rubbing would be a start...

Share this post


Link to post
Share on other sites
steve@cornwall
Ones the right size and offset to fit over the brakes and without rubbing would be a start...

 

Set of these (are 108 pcd) with spacers do you?

 

 

post-7883-1236788125_thumb.jpg

Edited by steve@cornwall

Share this post


Link to post
Share on other sites
hawkesy226
Set of these (are 108 pcd) with spacers do you?

 

 

post-7883-1236788125_thumb.jpg

 

 

my mates going to take a wheel of his mini to try on saturday so i'll keep posted if not i will get a set of rallye wheels.

Share this post


Link to post
Share on other sites
Tom Fenton

Mini wheels are 4" PCD, no where near Peugeot fitment, so don't waste your time taking one off!

Share this post


Link to post
Share on other sites
kyepan

if you're looking for light weight wheels try the c5 steelies, they are 4.6kgs and clear the 283mm hdi conversion

Share this post


Link to post
Share on other sites
gti_al
i seen on the cover of this months fast car a 106 with mini lites on it and just wondering what i would need to make them fit to a 205?

 

Can you scan the photo? I have been wondering about this for a while

 

One of the local wheel companies makes them in custom fitments, and they have some dish so could work well. It might be a good way to get something a bit wider on, without going up in size.

 

Don't some fords have the same fitment? There are plenty available for escorts

Share this post


Link to post
Share on other sites
Baz
Don't some fords have the same fitment? There are plenty available for escorts

 

Yes, older rwd fords are the same PCD and similar offset etc.

Share this post


Link to post
Share on other sites
gti_al

Does someone want to pinch some off an escort then, and convince me that 7x13 or 7x14 would look stupid?

Share this post


Link to post
Share on other sites
blue_haddock

The guy with the 106 on PSOOC and is called Nazor, the car was created by a firm called Peden Conceptz - possibly worthwhile getting in touch with them over the rims.

Share this post


Link to post
Share on other sites
blue_haddock

Also compomotive do a rim that looks nigh on identical to mini-lights which are available in all sorts of sizes and fitments.

Share this post


Link to post
Share on other sites
gti_al
The guy with the 106 on PSOOC and is called Nazor, the car was created by a firm called Peden Conceptz - possibly worthwhile getting in touch with them over the rims.

 

3244871881_5d08689a9e_o.jpg

 

I think it looks good. He needs to get his hand off it i think... but the wheels look good. What "design" or "creation" is involved in painting a bonnet and changing the suspention?

Share this post


Link to post
Share on other sites
Baz

I think it looks crap tbh, doesnt suit it at all. they look ok on 205's though.

 

Also compomotive do a rim that looks nigh on identical to mini-lights which are available in all sorts of sizes and fitments.

 

Compomotive ML's, been around for yeaaars! :wub:

Share this post


Link to post
Share on other sites
pugdamo

I dont like it either,wheels dont suit the car and its way too low. The car and the rear lights look good though

Share this post


Link to post
Share on other sites
jonnygoodhand

Could work...

 

Peugeot%20104%20ZS%20Evo2%20-%20M1%20-%20885%20BHJ%2075.jpg

Share this post


Link to post
Share on other sites
gti_al
I think it looks crap tbh, doesnt suit it at all. they look ok on 205's though.

 

Make no mistake, i was just talking about the wheels. I like the depth, which you can't get from many other wheels. I don't particularly like 106s at the best of times, let alone when they are badly modified

 

I might wait until i can justify a second set of wheels, then get some made up. For $800 they are worth a go

Share this post


Link to post
Share on other sites
Paul_13

Is that a Talbot Sunbeam above ^^

 

Saw a few of these at Castle Coombe but didn't know what they were.

Share this post


Link to post
Share on other sites
t3dders
Is that a Talbot Sunbeam above ^^

 

Saw a few of these at Castle Coombe but didn't know what they were.

 

It's a Peugeot 104... very similar to a Talbot Samba

Share this post


Link to post
Share on other sites
Baz

Nothing like a Sunbeam though!

 

SunbeamGpA.jpg

 

:wub:

Share this post


Link to post
Share on other sites
Paul_13
:wub: Very nice, are they RWD?

Share this post


Link to post
Share on other sites
Baz

Yup, the original hot hatches!

Edited by Baz

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×