Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest Hogan's Pug

Won't Start

Recommended Posts

Guest Hogan's Pug

HI all. I have done some bits to my 1.6gti and finished putting everything back together under the bonntet

but now it wont start. Here is a list of things that have been changed.

 

New plugs - check

New Leads - check

New dizzy cap - check

New rotor arm - check

New sad device - check

New air flow metre - check

cleaned out throttle bodie - check

 

Any ideas. cheers all

Share this post


Link to post
Share on other sites
Baz

Is it even turning over etc?

Share this post


Link to post
Share on other sites
Guest Hogan's Pug

Yea turns over ok, yea afm connector plugged back in. Also has new air filter

Share this post


Link to post
Share on other sites
BusEngineer

It was the dizzy to ignition amp wire that got me last time the plug a dropped apart and i hadnt noticed B)

Share this post


Link to post
Share on other sites
Guest Hogan's Pug

Thats the wire from the dizzy with yellow connector on it yea. If that the one then all connected.

Share this post


Link to post
Share on other sites
pugdamo

I know this is very unlikely but did you gap the plugs? vary unlikely but maybe the tips are bent onto the electrodes on the plugs? I have had this before on one plug out of a set and wouldnt say its impossible to happen on a set of them (i know its unlikely but youve checked all the stuff i would suggest and havnt really touched much else)

 

Maybe ignition module has picked its moment very well to pack up?

Share this post


Link to post
Share on other sites
dcc

did you put the leads on in the right order?

Share this post


Link to post
Share on other sites
trialster

fuel pump working?

 

getting a spark?

 

Will

Share this post


Link to post
Share on other sites
Guest Hogan's Pug

Yea brand new ngk plugs and gapped. Yea leads on in right order and am getting a spark,

If ignition module has gone will still get spark?

Yea you can hear fuel pump working and have checked the pulse to the injectors, all ok

Share this post


Link to post
Share on other sites
Sign in to follow this  

×