Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Mark205

Coolant Pipes

Recommended Posts

Mark205

Will someone post a diagram of the coolant system up please.

 

I have no idea which order the pipes go off the distribution block at the back of the engine.

 

If someone could post up a diagram of the whole coolant system i would be extremly gratefull.

Share this post


Link to post
Share on other sites
Tom Fenton

One of them goes to the exp tank, the other to the heater. It makes no difference which way round they go, so connect them in the neatest way.

Share this post


Link to post
Share on other sites
Baz

Pretty much the same as this bar the pipe that goes round the back of the head...

 

16coolantnow1.gif

Share this post


Link to post
Share on other sites
Mark205

Baz, on mine the distribution block has an outlet pipe where dist block is written, everything else i pressume is correct.

Share this post


Link to post
Share on other sites
Baz

yeah that's the way they are, it's just the diagram isn't pin-perfect! B)

Share this post


Link to post
Share on other sites
Mark205

Diagrams good, did you draw it yourself.

 

This helps alot, i should be able to get on with it know.

Share this post


Link to post
Share on other sites
Baz

Nope, it was done by another member a few years ago and has been around alot! B)

 

Presuming it's the Mi16 you're fitting, you can use the water dist. block from an 8v XU and plumb it exactly the same, blocking the excess take off from the thermostat housing that would usually go across the back of the head above the manifold & use the 4th dist. block take off.

 

DSC00170-1.jpg

Share this post


Link to post
Share on other sites
Sign in to follow this  

×