6mm Wheel Spacers

[projectpug 0]

Hi,

 

I require some 6mm spacers which i will run with stud/nut kit. Where can i get 6mm ones from and if not what do people recommend i should get?

 

Thanks

[oli-pug 6 2 Cars]

Get some 10mms spacers then machine them down??

[EdCherry 34 1 Cars]

Rippthrough can custom make spacers, give him a PM with your requirments and im sure he will get back to you

[C_W 3 1 Cars]

I'm sure 5mm ones will be availble; or is it that critical (clearance) you need 6mm?

[projectpug 0]

Yes 6mm is the critical clearance will send a PM to Rippthrough,

 

thanks

[Henry Yorke 269 3 Cars]

You may struggle to get hubcentric ones with that space depth as there is not really enough metal to put a lip in the centre bore. However Rippthrough will be able to advise

[bouver 0]

I have just fited some 30mm spacers. That is, a 25 and a 5. I used spiggot rings to make them hubcentric, I had to just take a bit of metal out with a die grinder. It all works fine now. They just came from road and rally discount in chesterfield.

 

I hope this helps