Shafts, Hubs And Calipers

[swervygerdy 0]

Hi

 

I've managed to ruin the threads on my front near side hub and am going to replace the whole unit. I believe the car is running 309gti drive shafts. I've already got the studs from AB Motorsport, I just need to know which hub to go for. It's a rally car - so a bit of a mix match of parts. If any one can steer me in the right direction - it'd be mucho appreciated!

 

Also - are these 1.6gti or 1.9gti calipers?

 

 

 

[welshpug 1,658]

1.9 type calipers, and if its 309 driveshafts it'll be 1.9 type hubs.

[swervygerdy 0]

Brilliant, thanks for the help!

 

Now, where's the best place to buy a hub, and does it come woth the bearing included?

Edited March 2, 2009 by swervygerdy

[welshpug 1,658]

new the only place I think would be Peugeot (or Citroen), and no they don't come with a bearing.

 

3307 85 is the hub part number, about £55+vat, bearing is 3350 16 about £47.50 + vat, bearing I'd get from a decent motorfactor for about £15

 

Its a pretty common hub though, used on most larger XU/XUD and ED/DW engined cars so getting a second hand one shouldn't be difficult.

[swervygerdy 0]

I never even thought of a second hand one - when you say larger cars with XU or XUD engines - would a 406 1.9TD be a likely candidate?

[welshpug 1,658]

yup, every 406 uses that hub.

 

just to clarify that's the hub itself not the carrier.

[swervygerdy 0]

Super!

 

I've a 200,000 mile 406 laid up in the driveway grazing, I knew I'd get a few more items of it before the shredder claims another victim!

 

Any other parts worth salvaging!?

Edited March 3, 2009 by swervygerdy

[swervygerdy 0]

Took the whole hub and carrier off the 406 - is a big job to seperate the hub from the carrier?

 

 

[welshpug 1,658]

you need a press